Albion alloys Micro Finish Abrasive Cloth Sheets 4000 Grit 100MM X 70MM

Abbiamo fornito ordini postali per gli strumenti di ingegneria per 30 anni, un’azienda di famiglia, abbiamo iniziato da un piccolo garage convertito a St Albans e siamo cresciuti costantemente nel corso degli anni e ora operano dal nostro nuovo magazzino di 10.000 piedi quadrati a Dunstable. Mail Order è ancora la nostra specialità, inviando diverse centinaia di ordini al giorno ai nostri clienti soddisfatti in tutto il mondo, sebbene la maggior parte della nostra attività arrivi tramite i nostri 8 siti Web di Tooling e eBay – diamo anche il benvenuto ai personal chiamanti per sfogliare le nostre migliaia di prodotti nel nostro showroom / magazzino a Dunstable – siamo aperti dal lunedì alle 8:00 alle 4:00 e al sabato 9:00 – 12pm. Un avvertimento di parole OD però: ci chiudiamo occasional.

Chip Decoder For Epson Stylus Pro 4000 7600 9600 Printer Decoder Board

Product Name Chip Decoder Suit Printer For Epson Stylus Pro 4000 For Epson Stylus Pro 7600 For Epson Stylus Pro 9600 Remarks Will send operation instruction with the decoder together Advantage Easy To Install,Saving Printing Cost.Work as permanent chip. Stable quality Condition Brand New Warranty 1:1 Replace Any Defective Packing List 1 set decoder board Product Description: After using the decryption card, users can freely use third-party ink, and the ink cartridge does not require a chip, greatly reducing printing costs and making it convenient and fast 2. After the decryption card is installed, it does not affect the printer’s warranty at all 3. Solve the problems of your machine no longer needing to unplug the ink cartridge for decoding, air intake into the ink tube, damaged ink cartridge contact points, and uncertain chips, so that your ink cartridge can work like a chip. Precautions for use: 1. After using the decryption card, due to the entire circuit being taken over by the electronic card, the user’s machine will not respond when inserting or unplugging ink cartridges. So it is recommended that users do not unplug the ink cartridge while the machine is printing to avoid affecting printing and the nozzle. In addition, users must check the ink cartridge capacity in a timely manner to prevent empty ink from affecting the nozzle. 2. If the panel indicates that the ink cartridge is abnormal, please lift and then lower the right or left ink cartridge pressure lever at will, and the ink cartridge can return to normal. 3. When the machine malfunctions due to various reasons and requires EPSON repair or warranty, simply remove all devices of this product, install the original ink cartridge, and restore the state before decryption. 4. Do not place strong signal devices such as mobile phones next to this system to avoid scratching. 1、 Initial decryption card: 1. Open the packaging box and there are one decryption card for each AB, two wide adapter cables, and eight narrow adapter cables inside. 2. Stick strong double-sided adhesive to the back of the AB decryption card, making it easy to secure the decryption card in a suitable position on the printer. 3. Please plug in all the adapter cables, paying attention to the blue head of the plug, which is inserted into the decryption card. The wide adapter cable is inserted into the upper socket 2、 Installation process: 1. Firstly, install the B decryption card, remove the left end cover of the printer, remove the protective film on the back of the decryption card B, and stick it as close as possible to the small board on the left side of the printer. 2. Unplug the FPC cable on the left side of the printer’s small board, and plug the other end of the decryption card B into the corresponding socket on the right side of the printer’s small board, paying attention to the blue side facing upwards. J9–CN1 BOX1-CN6 BOX2-CN7BOX3CN8 BOX4-CN9 3. Insert the FPC plug from the original CN1 on the left side of the printer into the J10 socket on the decryption card B. Pay attention to the direction of the plug! The blue side of the plug is different from the J9 plug, facing each other on the top. 4. After inserting, restore the dust cover. 5. Then install the decryption card A, remove the right end cover of the printer, remove the protective film on the back of the decryption card A, and stick it as close as possible to the small board on the right side of the printer. 6. Unplug the FPC cable on the small board on the right side of the printer, and plug the other end of decryption card A into the corresponding socket on the small board on the right side of the printer, paying attention to the blue side facing upwards. J9–CN1BOX1-CN6 BOX2-CN7 BOX3-CN8 BOX4-CN9 7. Insert the FPC plug from the original CN1 on the right side of the printer into the J10 socket on the decryption card A. Pay attention to the direction of the plug! The blue side of the plug is different from the J9 plug, facing each other on the top. 8. Turn on the power and turn it on. All ink cartridges display full ink and recognize the machine. Then, turn off the power, install the left and right end covers, and you can use them normally. SHIPPING: by DHLFEDEX to worldwide, very fast !