Paasche 1/5 HP Airbrush Compressor w/ EZ Single Action Airbrush Set

Paasche 1/5 HP Airbrush Compressor w/ EZ Single Action Airbrush Set EZ Single Action – External Mix – Siphon Feed Airbrush: This single action airbrush is great for beginners. Simple to learn and use, just pick it up and start spraying. Can achieve patterns of 1/16″ to 1-1/2″ and spray any properly thinned paint. Can be used with pressure can or a compressor, both needed fittings are supplied. Includes: EZ airbrush, 1 oz bottle assembly, 1 oz storage bottle, hanger, wrench, air hose, pressure tank & compressor adapters Specs: Part Number: EZ-STARTER Type: Single Action, External mix, Siphon feed Head Size: .6mm Fluid Packing: Can spray solvent or water-based fluids Air Volume: 20 PSI @ .5 CFM Air Pressure: 20-45 PSI Bottle size: 1/4oz to 8oz bottles available Spray Pattern: 1/16″ to 1-1/2″ Weight: .5 Lbs The DH550R airbrush compressor is perfect for any hobby or artist airbrush. The maximum operating pressure will be about 35 PSI depending on airbrush being used. The DH550R is lightweight, easily mobile and best of all quiet. The auto shutoff feature turns the compressor off when the airbrush is not being triggered to increase compressor life. Included with the compressor is a 1/8BPS adaptor for competitor hoses. The compressor features include: · 1/5 HP piston compressor · Regulator & moisture trap · Dual airbrush holder · Delivers 1-35 PSI depending on airbrush being used · Standard Paasche 1/4NPT hose fitting · 1/8 BPS hose adaptor for competitor hoses · Auto shutoff feature · Carrying handle · Quiet: noise level is 47 Db’s ​​​​​​​​​​​​​​​​​​​​​ Payment We accept payment by any of the following methods: PayPal & Major Credit Cards Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! Shipping Your order will be dispatched within 1-2 working day of receiving payment (Monday-Friday) and you should expect to receive it one or five days after dispatch. Tracking number will be on the invoice which will be e-mailed. Returns If you are not 100% satisfied with your purchase, you can return the product and get a refund. You can return a product for up to 30 days from the date you purchased. ​​​​​​​Any product you return must be in the same condition you received it and in the original packaging. Customer pays return shipping.EZ Single Action – External Mix – Siphon Feed Airbrush: This single action airbrush is great for beginners. Simple to learn and use, just pick it up and start spraying. Can achieve patterns of 1/16″ to 1-1/2″ and spray any properly thinned paint. Can be used with pressure can or a compressor, both needed fittings are supplied. Includes: EZ airbrush, 1 oz bottle assembly, 1 oz storage bottle, hanger, wrench, air hose, pressure tank & compressor adapters Specs: Part Number: EZ-STARTER Type: Single Action, External mix, Siphon feed Head Size: .6mm Fluid Packing: Can spray solvent or water-based fluids Air Volume: 20 PSI @ .5 CFM Air Pressure: 20-45 PSI Bottle size: 1/4oz to 8oz bottles available Spray Pattern: 1/16″ to 1-1/2″ Weight: .5 Lbs The DH550R airbrush compressor is perfect for any hobby or artist airbrush. The maximum operating pressure will be about 35 PSI depending on airbrush being used. The DH550R is lightweight, easily mobile and best of all quiet. The auto shutoff feature turns the compressor off when the airbrush is not being triggered to increase compressor life. Included with the compressor is a 1/8BPS adaptor for competitor hoses. The compressor features include: · 1/5 HP piston compressor · Regulator & moisture trap · Dual airbrush holder · Delivers 1-35 PSI depending on airbrush being used · Standard Paasche 1/4NPT hose fitting · 1/8 BPS hose adaptor for competitor hoses · Auto shutoff feature · Carrying handle · Quiet: noise level is 47 Db’s Paasche 1/5 HP Airbrush Compressor w/ EZ Single Action Airbrush Set EZ Single Action – External Mix – Siphon Feed Airbrush: This single action airbrush is great for beginners. Simple to learn and use, just pick it up and start spraying. Can achieve patterns of 1/16″ to 1-1/2″ and spray any properly thinned paint. Can be used with pressure can or a compressor, both needed fittings are supplied. Includes: EZ airbrush, 1 oz bottle assembly, 1 oz storage bottle, hanger, wrench, air hose, pressure tank & compressor adapters Specs: Part Number: EZ-STARTER Type: Single Action, External mix, Siphon feed Head Size: .6mm Fluid Packing: Can spray solvent or water-based fluids Air Volume: 20 PSI @ .5 CFM Air Pressure: 20-45 PSI Bottle size: 1/4oz to 8oz bottles available Spray Pattern: 1/16″ to 1-1/2″ Weight: .5 Lbs The DH550R airbrush compressor is perfect for any hobby or artist airbrush. The maximum operating pressure will be about 35 PSI depending on airbrush being used. The DH550R is lightweight, easily mobile and best of all quiet. The auto shutoff feature turns the compressor off when the airbrush is not being triggered to increase compressor life. Included with the compressor is a 1/8BPS adaptor for competitor hoses. The compressor features include: · 1/5 HP piston compressor · Regulator & moisture trap · Dual airbrush holder · Delivers 1-35 PSI depending on airbrush being used · Standard Paasche 1/4NPT hose fitting · 1/8 BPS hose adaptor for competitor hoses · Auto shutoff feature · Carrying handle · Quiet: noise level is 47 Db’s Returns If you are not 100% satisfied with your purchase, you can return the product and get a refund. You can return a product for up to 30 days from the date you purchased. ​​​​​​​Any product you return must be in the same condition you received it and in the original packaging. Customer pays return shipping.​​​​​​​​​​​​​​​​​​​​​ Payment We accept payment by any of the following methods: PayPal & Major Credit Cards Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! Shipping Your order will be dispatched within 1-2 working day of receiving payment (Monday-Friday) and you should expect to receive it one or five days after dispatch. Tracking number will be on the invoice which will be e-mailed. EZ Single Action – External Mix – Siphon Feed Airbrush: This single action airbrush is great for beginners. Simple to learn and use, just pick it up and start spraying. Can achieve patterns of 1/16″ to 1-1/2″ and spray any properly thinned paint. Can be used with pressure can or a compressor, both needed fittings are supplied. Includes: EZ airbrush, 1 oz bottle assembly, 1 oz storage bottle, hanger, wrench, air hose, pressure tank & compressor adapters Specs: Part Number: EZ-STARTER Type: Single Action, External mix, Siphon feed Head Size: .6mm Fluid Packing: Can spray solvent or water-based fluids Air Volume: 20 PSI @ .5 CFM Air Pressure: 20-45 PSI Bottle size: 1/4oz to 8oz bottles available Spray Pattern: 1/16″ to 1-1/2″ Weight: .5 Lbs The DH550R airbrush compressor is perfect for any hobby or artist airbrush. The maximum operating pressure will be about 35 PSI depending on airbrush being used. The DH550R is lightweight, easily mobile and best of all quiet. The auto shutoff feature turns the compressor off when the airbrush is not being triggered to increase compressor life. Included with the compressor is a 1/8BPS adaptor for competitor hoses. The compressor features include: · 1/5 HP piston compressor · Regulator & moisture trap · Dual airbrush holder · Delivers 1-35 PSI depending on airbrush being used · Standard Paasche 1/4NPT hose fitting · 1/8 BPS hose adaptor for competitor hoses · Auto shutoff feature · Carrying handle · Quiet: noise level is 47 Db’s

Paasche 1/5 HP Airbrush Compressor w/H Single Action Airbrush Set w/Three Heads

Paasche 1/5 HP Airbrush Compressor w/H Single Action Airbrush Set w/Three Heads H Single Action – External Mix – Siphon Feed Airbrush: This single action airbrush features a chrome plated body for durability. Included with the airbrush are all three available spray heads, which allow the H airbrush to be used in a wide range of application. The H single action allows the user to achieve fine lines down to 1/16 inch and wider patterns of up to 1-1/2 inches. It simple and easy to use and requires very little practice compared to double action models. The best uses are those requiring more basic spraying like solid coats, uniform lines or stencil work. Clean up is as simple as spraying your paint cleaner though the airbrush. The H is used for many applications including hobby, craft, chip, and ding repair, taxidermy, ceramics, cake decorating, tanning, tattoos, etc. The H airbrush is made in the USA. H Airbrush Includes: H#3 airbrush, size 1 & 5 spray heads, 1/4 oz metal cup, 1 oz bottle assembly, 1 oz storage bottle, hanger, wrench, 6 foot braided air hose, lessons booklet and manual Features: · Airbrush Made In The USA · Three head sizes for any application · Highly polished & hardened stainless steel needles for long life and reduced clogging · Solvent proof needle packing allow spraying of water & solvent based paints · Chrome plated body Specs: Part Number: H-3AS Type: Single Action, External mix, Siphon feed Head Size: Size 1 (.55mm), Size 3 (.74mm), Size 5 (1.05mm) Fluid Packing: Can spray solvent or water-based fluids Air Volume: 20 PSI @ .5 CFM Air Pressure: 20-75 PSI Air Inlet: ¼-20 Thread (Paasche thread) – adapters available Bottle size: 1/4oz to 8oz bottles available Spray Pattern: 1/32 to 1-1/2 Finish: Chrome plated body The DH550R airbrush compressor is perfect for any hobby or artist airbrush. The maximum operating pressure will be about 35 PSI depending on airbrush being used. The DH550R includes two airbrush holders, is lightweight, easily mobile and best of all quiet. The auto shutoff feature turn the compressor off when the airbrush is not being triggered to increase compressor life. Included with the compressor is a 1/8BPS adaptor for competitor hoses. The compressor features include: · 1/5 HP piston compressor · Regulator & moisture trap · Dual airbrush holders · Delivers 1-35 PSI depending on airbrush being used · Standard Paasche 1/4NPT hose fitting · 1/8 BPS hose adaptor for competitor hoses · Auto shutoff feature · Carrying handle · Quiet: noise level is 47 Db’s ​​​​​​​​​​​​​​​​​​​​​ Payment We accept payment by any of the following methods: PayPal & Major Credit Cards Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! Shipping Your order will be dispatched within 1-2 working day of receiving payment (Monday-Friday) and you should expect to receive it one or five days after dispatch. Tracking number will be on the invoice which will be e-mailed. Returns If you are not 100% satisfied with your purchase, you can return the product and get a refund. You can return a product for up to 30 days from the date you purchased. ​​​​​​​Any product you return must be in the same condition you received it and in the original packaging. Customer pays return shipping.H Single Action – External Mix – Siphon Feed Airbrush: This single action airbrush features a chrome plated body for durability. Included with the airbrush are all three available spray heads, which allow the H airbrush to be used in a wide range of application. The H single action allows the user to achieve fine lines down to 1/16 inch and wider patterns of up to 1-1/2 inches. It simple and easy to use and requires very little practice compared to double action models. The best uses are those requiring more basic spraying like solid coats, uniform lines or stencil work. Clean up is as simple as spraying your paint cleaner though the airbrush. The H is used for many applications including hobby, craft, chip, and ding repair, taxidermy, ceramics, cake decorating, tanning, tattoos, etc. The H airbrush is made in the USA. H Airbrush Includes: H#3 airbrush, size 1 & 5 spray heads, 1/4 oz metal cup, 1 oz bottle assembly, 1 oz storage bottle, hanger, wrench, 6 foot braided air hose, lessons booklet and manual Features: · Airbrush Made In The USA · Three head sizes for any application · Highly polished & hardened stainless steel needles for long life and reduced clogging · Solvent proof needle packing allow spraying of water & solvent based paints · Chrome plated body Specs: Part Number: H-SET Type: Single Action, External mix, Siphon feed Head Size: Size 1 (.55mm), Size 3 (.74mm), Size 5 (1.05mm) Fluid Packing: Can spray solvent or water-based fluids Air Volume: 20 PSI @ .5 CFM Air Pressure: 20-75 PSI Air Inlet: ¼-20 Thread (Paasche thread) – adapters available Bottle size: 1/4oz to 8oz bottles available Spray Pattern: 1/32 to 1-1/2 Finish: Chrome plated body The DH550R airbrush compressor is perfect for any hobby or artist airbrush. The maximum operating pressure will be about 35 PSI depending on airbrush being used. The DH550R includes two airbrush holders, is lightweight, easily mobile and best of all quiet. The auto shutoff feature turn the compressor off when the airbrush is not being triggered to increase compressor life. Included with the compressor is a 1/8BPS adaptor for competitor hoses. The compressor features include: · 1/5 HP piston compressor · Regulator & moisture trap · Dual airbrush holders · Delivers 1-35 PSI depending on airbrush being used · Standard Paasche 1/4NPT hose fitting · 1/8 BPS hose adaptor for competitor hoses · Auto shutoff feature · Carrying handle · Quiet: noise level is 47 Db’s Paasche 1/5 HP Airbrush Compressor w/H Single Action Airbrush Set w/Three Heads H Single Action – External Mix – Siphon Feed Airbrush: This single action airbrush features a chrome plated body for durability. Included with the airbrush are all three available spray heads, which allow the H airbrush to be used in a wide range of application. The H single action allows the user to achieve fine lines down to 1/16 inch and wider patterns of up to 1-1/2 inches. It simple and easy to use and requires very little practice compared to double action models. The best uses are those requiring more basic spraying like solid coats, uniform lines or stencil work. Clean up is as simple as spraying your paint cleaner though the airbrush. The H is used for many applications including hobby, craft, chip, and ding repair, taxidermy, ceramics, cake decorating, tanning, tattoos, etc. The H airbrush is made in the USA. H Airbrush Includes: H#3 airbrush, size 1 & 5 spray heads, 1/4 oz metal cup, 1 oz bottle assembly, 1 oz storage bottle, hanger, wrench, 6 foot braided air hose, lessons booklet and manual Features: · Airbrush Made In The USA · Three head sizes for any application · Highly polished & hardened stainless steel needles for long life and reduced clogging · Solvent proof needle packing allow spraying of water & solvent based paints · Chrome plated body Specs: Part Number: H-SET Type: Single Action, External mix, Siphon feed Head Size: Size 1 (.55mm), Size 3 (.74mm), Size 5 (1.05mm) Fluid Packing: Can spray solvent or water-based fluids Air Volume: 20 PSI @ .5 CFM Air Pressure: 20-75 PSI Air Inlet: ¼-20 Thread (Paasche thread) – adapters available Bottle size: 1/4oz to 8oz bottles available Spray Pattern: 1/32 to 1-1/2 Finish: Chrome plated body The DH550R airbrush compressor is perfect for any hobby or artist airbrush. The maximum operating pressure will be about 35 PSI depending on airbrush being used. The DH550R includes two airbrush holders, is lightweight, easily mobile and best of all quiet. The auto shutoff feature turn the compressor off when the airbrush is not being triggered to increase compressor life. Included with the compressor is a 1/8BPS adaptor for competitor hoses. The compressor features include: · 1/5 HP piston compressor · Regulator & moisture trap · Dual airbrush holders · Delivers 1-35 PSI depending on airbrush being used · Standard Paasche 1/4NPT hose fitting · 1/8 BPS hose adaptor for competitor hoses · Auto shutoff feature · Carrying handle · Quiet: noise level is 47 Db’s Returns If you are not 100% satisfied with your purchase, you can return the product and get a refund. You can return a product for up to 30 days from the date you purchased. ​​​​​​​Any product you return must be in the same condition you received it and in the original packaging. Customer pays return shipping.​​​​​​​​​​​​​​​​​​​​​ Payment We accept payment by any of the following methods: PayPal & Major Credit Cards Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! Shipping Your order will be dispatched within 1-2 working day of receiving payment (Monday-Friday) and you should expect to receive it one or five days after dispatch. Tracking number will be on the invoice which will be e-mailed. H Single Action – External Mix – Siphon Feed Airbrush: This single action airbrush features a chrome plated body for durability. Included with the airbrush are all three available spray heads, which allow the H airbrush to be used in a wide range of application. The H single action allows the user to achieve fine lines down to 1/16 inch and wider patterns of up to 1-1/2 inches. It simple and easy to use and requires very little practice compared to double action models. The best uses are those requiring more basic spraying like solid coats, uniform lines or stencil work. Clean up is as simple as spraying your paint cleaner though the airbrush. The H is used for many applications including hobby, craft, chip, and ding repair, taxidermy, ceramics, cake decorating, tanning, tattoos, etc. The H airbrush is made in the USA. H Airbrush Includes: H#3 airbrush, size 1 & 5 spray heads, 1/4 oz metal cup, 1 oz bottle assembly, 1 oz storage bottle, hanger, wrench, 6 foot braided air hose, lessons booklet and manual Features: · Airbrush Made In The USA · Three head sizes for any application · Highly polished & hardened stainless steel needles for long life and reduced clogging · Solvent proof needle packing allow spraying of water & solvent based paints · Chrome plated body Specs: Part Number: H-SET Type: Single Action, External mix, Siphon feed Head Size: Size 1 (.55mm), Size 3 (.74mm), Size 5 (1.05mm) Fluid Packing: Can spray solvent or water-based fluids Air Volume: 20 PSI @ .5 CFM Air Pressure: 20-75 PSI Air Inlet: ¼-20 Thread (Paasche thread) – adapters available Bottle size: 1/4oz to 8oz bottles available Spray Pattern: 1/32 to 1-1/2 Finish: Chrome plated body The DH550R airbrush compressor is perfect for any hobby or artist airbrush. The maximum operating pressure will be about 35 PSI depending on airbrush being used. The DH550R includes two airbrush holders, is lightweight, easily mobile and best of all quiet. The auto shutoff feature turn the compressor off when the airbrush is not being triggered to increase compressor life. Included with the compressor is a 1/8BPS adaptor for competitor hoses. The compressor features include: · 1/5 HP piston compressor · Regulator & moisture trap · Dual airbrush holders · Delivers 1-35 PSI depending on airbrush being used · Standard Paasche 1/4NPT hose fitting · 1/8 BPS hose adaptor for competitor hoses · Auto shutoff feature · Carrying handle · Quiet: noise level is 47 Db’s

Paasche DA400R 1/4 HP Airbrush Compressor w/ TG-3AS Gravity Feed Airbrush Set

Paasche DA400R 1/4 HP Airbrush Compressor w/ TG-3F Gravity Feed Airbrush Set The Paasche TG is a double action gravity feed airbrush. The airbrush features a chrome plated body and anodized aluminum handle for durability. The TG is our finest detail airbrush allowing the user to achieve hair line detail and using our optional fan head wider patterns up to 3 inches. A PTFE packing allows the TG to handle any water or solvent based paint. Clean up is as simple as spraying your paint cleaner though the airbrush and wiping of the needle. The TG is best used for those requiring high end detail. Applications including automotive graphics, models, taxidermy, cake decorating, tattoos, finger nails, graphic arts, illustration, etc. The TG airbrush is made and assembled in the USA and includes the following. TG-3AS Includes: TG#2 double action airbrush, .4oz cup, cup cover, size 1 & 3 heads, fan aircap, hanger, (2) wrenches, 6ft braided hose, lessons booklet and manual. Features: • Airbrush Made In The USA • Quality Precision materials for fine detail work • Highly polished & hardened stainless steel needles for long life and reduced clogging • Solvent proof needle packing allow spraying of water & solvent based paints • Chrome plated body Specs: Part Number: TG-3AS Type: Double Action, internal mix, gravity feed Head Size: Size 1(.25mm), size 2(.38mm), size 3(.66mm) Fluid Packing: PTFE – can spray solvent or water based fluids Air Volume: 20 PSI @ .5 CFM Air Pressure: 20-75 PSI Air Inlet: ¼-20 Paasche thread – adapters available Bottle size: N/A Spray Pattern: Hairline to 1-1/2 – with fan aircap up to 3 Finish: Chrome plated body The DA400R airbrush compressor is perfect for any hobby or artist airbrush. The maximum operating pressure will be about 50 PSI depending on airbrush being used. The DA400R is light weight, easily mobile and best of all quiet. The auto shutoff feature turn the compressor off when the airbrush is not being triggered to increase compressor life. Included with the compressor is a 1/8BPS adaptor for competitor hoses. The compressor features include: • 1/4 HP piston compressor • Regulator & moisture trap • Delivers 1-50 PSI depending on airbrush being used • Standard Paassche 1/4NPT hose fitting • 1/8 BPS hose adaptor for competitor hoses • Auto shutoff feature • Carrying handle • Quiet: noise level is 50 Db’s ​​​​​​​​​​​​​​​​​​​​​ Payment We accept payment by any of the following methods: PayPal & Major Credit Cards Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! Shipping Your order will be dispatched within 1-2 working day of receiving payment (Monday-Friday) and you should expect to receive it one or five days after dispatch. Tracking number will be on the invoice which will be e-mailed. Returns If you are not 100% satisfied with your purchase, you can return the product and get a refund. You can return a product for up to 30 days from the date you purchased. ​​​​​​​Any product you return must be in the same condition you received it and in the original packaging. Customer pays return shipping.The Paasche TG is a double action gravity feed airbrush. The airbrush features a chrome plated body and anodized aluminum handle for durability. The TG is our finest detail airbrush allowing the user to achieve hair line detail and using our optional fan head wider patterns up to 3 inches. A PTFE packing allows the TG to handle any water or solvent based paint. Clean up is as simple as spraying your paint cleaner though the airbrush and wiping of the needle. The TG is best used for those requiring high end detail. Applications including automotive graphics, models, taxidermy, cake decorating, tattoos, finger nails, graphic arts, illustration, etc. The TG airbrush is made and assembled in the USA and includes the following. TG-3F Includes: TG#2 double action airbrush, .4oz cup, cup cover, size 1 & 3 heads, fan aircap, hanger, (2) wrenches, 6ft braided hose, lessons booklet and manual. Features: • Airbrush Made In The USA • Quality Precision materials for fine detail work • Highly polished & hardened stainless steel needles for long life and reduced clogging • Solvent proof needle packing allow spraying of water & solvent based paints • Chrome plated body Specs: Part Number: TG-3F Type: Double Action, internal mix, gravity feed Head Size: Size 1(.25mm), size 2(.38mm), size 3(.66mm) Fluid Packing: PTFE – can spray solvent or water based fluids Air Volume: 20 PSI @ .5 CFM Air Pressure: 20-75 PSI Air Inlet: ¼-20 Paasche thread – adapters available Bottle size: N/A Spray Pattern: Hairline to 1-1/2 – with fan aircap up to 3 Finish: Chrome plated body The DA400R airbrush compressor is perfect for any hobby or artist airbrush. The maximum operating pressure will be about 50 PSI depending on airbrush being used. The DA400R is light weight, easily mobile and best of all quiet. The auto shutoff feature turn the compressor off when the airbrush is not being triggered to increase compressor life. Included with the compressor is a 1/8BPS adaptor for competitor hoses. The compressor features include: • 1/4 HP piston compressor • Regulator & moisture trap • Delivers 1-50 PSI depending on airbrush being used • Standard Paassche 1/4NPT hose fitting • 1/8 BPS hose adaptor for competitor hoses • Auto shutoff feature • Carrying handle • Quiet: noise level is 50 Db’s Paasche DA400R 1/4 HP Airbrush Compressor w/ TG-3F Gravity Feed Airbrush Set The Paasche TG is a double action gravity feed airbrush. The airbrush features a chrome plated body and anodized aluminum handle for durability. The TG is our finest detail airbrush allowing the user to achieve hair line detail and using our optional fan head wider patterns up to 3 inches. A PTFE packing allows the TG to handle any water or solvent based paint. Clean up is as simple as spraying your paint cleaner though the airbrush and wiping of the needle. The TG is best used for those requiring high end detail. Applications including automotive graphics, models, taxidermy, cake decorating, tattoos, finger nails, graphic arts, illustration, etc. The TG airbrush is made and assembled in the USA and includes the following. TG-3F Includes: TG#2 double action airbrush, .4oz cup, cup cover, size 1 & 3 heads, fan aircap, hanger, (2) wrenches, 6ft braided hose, lessons booklet and manual. Features: • Airbrush Made In The USA • Quality Precision materials for fine detail work • Highly polished & hardened stainless steel needles for long life and reduced clogging • Solvent proof needle packing allow spraying of water & solvent based paints • Chrome plated body Specs: Part Number: TG-3F Type: Double Action, internal mix, gravity feed Head Size: Size 1(.25mm), size 2(.38mm), size 3(.66mm) Fluid Packing: PTFE – can spray solvent or water based fluids Air Volume: 20 PSI @ .5 CFM Air Pressure: 20-75 PSI Air Inlet: ¼-20 Paasche thread – adapters available Bottle size: N/A Spray Pattern: Hairline to 1-1/2 – with fan aircap up to 3 Finish: Chrome plated body The DA400R airbrush compressor is perfect for any hobby or artist airbrush. The maximum operating pressure will be about 50 PSI depending on airbrush being used. The DA400R is light weight, easily mobile and best of all quiet. The auto shutoff feature turn the compressor off when the airbrush is not being triggered to increase compressor life. Included with the compressor is a 1/8BPS adaptor for competitor hoses. The compressor features include: • 1/4 HP piston compressor • Regulator & moisture trap • Delivers 1-50 PSI depending on airbrush being used • Standard Paassche 1/4NPT hose fitting • 1/8 BPS hose adaptor for competitor hoses • Auto shutoff feature • Carrying handle • Quiet: noise level is 50 Db’s Returns If you are not 100% satisfied with your purchase, you can return the product and get a refund. You can return a product for up to 30 days from the date you purchased. ​​​​​​​Any product you return must be in the same condition you received it and in the original packaging. Customer pays return shipping.​​​​​​​​​​​​​​​​​​​​​ Payment We accept payment by any of the following methods: PayPal & Major Credit Cards Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! Shipping Your order will be dispatched within 1-2 working day of receiving payment (Monday-Friday) and you should expect to receive it one or five days after dispatch. Tracking number will be on the invoice which will be e-mailed. The Paasche TG is a double action gravity feed airbrush. The airbrush features a chrome plated body and anodized aluminum handle for durability. The TG is our finest detail airbrush allowing the user to achieve hair line detail and using our optional fan head wider patterns up to 3 inches. A PTFE packing allows the TG to handle any water or solvent based paint. Clean up is as simple as spraying your paint cleaner though the airbrush and wiping of the needle. The TG is best used for those requiring high end detail. Applications including automotive graphics, models, taxidermy, cake decorating, tattoos, finger nails, graphic arts, illustration, etc. The TG airbrush is made and assembled in the USA and includes the following. TG-3F Includes: TG#2 double action airbrush, .4oz cup, cup cover, size 1 & 3 heads, fan aircap, hanger, (2) wrenches, 6ft braided hose, lessons booklet and manual. Features: • Airbrush Made In The USA • Quality Precision materials for fine detail work • Highly polished & hardened stainless steel needles for long life and reduced clogging • Solvent proof needle packing allow spraying of water & solvent based paints • Chrome plated body Specs: Part Number: TG-3F Type: Double Action, internal mix, gravity feed Head Size: Size 1(.25mm), size 2(.38mm), size 3(.66mm) Fluid Packing: PTFE – can spray solvent or water based fluids Air Volume: 20 PSI @ .5 CFM Air Pressure: 20-75 PSI Air Inlet: ¼-20 Paasche thread – adapters available Bottle size: N/A Spray Pattern: Hairline to 1-1/2 – with fan aircap up to 3 Finish: Chrome plated body The DA400R airbrush compressor is perfect for any hobby or artist airbrush. The maximum operating pressure will be about 50 PSI depending on airbrush being used. The DA400R is light weight, easily mobile and best of all quiet. The auto shutoff feature turn the compressor off when the airbrush is not being triggered to increase compressor life. Included with the compressor is a 1/8BPS adaptor for competitor hoses. The compressor features include: • 1/4 HP piston compressor • Regulator & moisture trap • Delivers 1-50 PSI depending on airbrush being used • Standard Paassche 1/4NPT hose fitting • 1/8 BPS hose adaptor for competitor hoses • Auto shutoff feature • Carrying handle • Quiet: noise level is 50 Db’s

Paasche 1/5 HP Airbrush Compressor w/ VL Double Action Siphon Feed Airbrush Set

Paasche 1/5 HP Airbrush Compressor w/ VL Double Action Siphon Feed Airbrush Set VL Double Action – Internal Mix – Siphon Feed Airbrush: The VL series is our most popular Airbrush due to its durability and ability to spray most material whether thick or thin. The PTFE packing can handle water based or solvent based mediums. The VL airbrush offers versatility with three interchangeable head sizes. This model can achieve spray patterns from fine detail to broader coverage handling light, medium and heavy fluids. The rounded head allows for easy removal of any dried paint with just a pinch of your fingers. VL-SET Includes: VL airbrush with size 3 head, size 1 & 5 heads, 1 oz bottle assembly, 1/4oz metal cup, 1oz storage bottle, 6′ braided hose, hanger, wrench and lessons book. Features: • Airbrush Made In The USA • Three head sizes for any application • Highly polished & hardened stainless steel needles for long life and reduced clogging • Line adjustment screw that can be used to pre-adjust paint flow • Solvent proof PTFE needle packing allows spraying of water & solvent based paints • Removable needle protector for fine detail spraying • Chrome plated body Specs: Part Number: VL-3AS Type: Double action, Internal mix, Siphon feed Head Size: Size 1 (.55mm), Size 3 (.74mm), Size 5 (1.05mm) Fluid Packing: PTFE – Can spray solvent or water-based fluids Air Volume: 20 PSI @ .5 CFM Air Pressure: 20-75 PSI Air Inlet: ¼”-20 Thread (Paasche thread) – adapters available Bottle size: 1/4oz to 8oz bottles available Spray Pattern: 1/32″ to 1-1/2″ Weight: 1.1 Lbs The DH550R airbrush compressor is perfect for any hobby or artist airbrush. The maximum operating pressure will be about 35 PSI depending on airbrush being used. The DH550R is lightweight, easily mobile and best of all quiet. The auto shutoff feature turns the compressor off when the airbrush is not being triggered to increase compressor life. Included with the compressor is a 1/8BPS adaptor for competitor hoses. The compressor features include: · 1/5 HP piston compressor · Regulator & moisture trap · Delivers 1-35 PSI depending on airbrush being used · Standard Paasche 1/4NPT hose fitting · 1/8 BPS hose adaptor for competitor hoses · Auto shutoff feature · Carrying handle · Quiet: noise level is 47 Db’s ​​​​​​​​​​​​​​​​​​​​​ Payment We accept payment by any of the following methods: PayPal & Major Credit Cards Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! Shipping Your order will be dispatched within 1-2 working day of receiving payment (Monday-Friday) and you should expect to receive it one or five days after dispatch. Tracking number will be on the invoice which will be e-mailed. Returns If you are not 100% satisfied with your purchase, you can return the product and get a refund. You can return a product for up to 30 days from the date you purchased. ​​​​​​​Any product you return must be in the same condition you received it and in the original packaging. Customer pays return shipping.VL Double Action – Internal Mix – Siphon Feed Airbrush: The VL series is our most popular Airbrush due to its durability and ability to spray most material whether thick or thin. The PTFE packing can handle water based or solvent based mediums. The VL airbrush offers versatility with three interchangeable head sizes. This model can achieve spray patterns from fine detail to broader coverage handling light, medium and heavy fluids. The rounded head allows for easy removal of any dried paint with just a pinch of your fingers. VL-SET Includes: VL airbrush with size 3 head, size 1 & 5 heads, 1 oz bottle assembly, 1/4oz metal cup, 1oz storage bottle, 6′ braided hose, hanger, wrench and lessons book. Features: • Airbrush Made In The USA • Three head sizes for any application • Highly polished & hardened stainless steel needles for long life and reduced clogging • Line adjustment screw that can be used to pre-adjust paint flow • Solvent proof PTFE needle packing allows spraying of water & solvent based paints • Removable needle protector for fine detail spraying • Chrome plated body Specs: Part Number: VL-SET Type: Double action, Internal mix, Siphon feed Head Size: Size 1 (.55mm), Size 3 (.74mm), Size 5 (1.05mm) Fluid Packing: PTFE – Can spray solvent or water-based fluids Air Volume: 20 PSI @ .5 CFM Air Pressure: 20-75 PSI Air Inlet: ¼”-20 Thread (Paasche thread) – adapters available Bottle size: 1/4oz to 8oz bottles available Spray Pattern: 1/32″ to 1-1/2″ Weight: 1.1 Lbs The DH550R airbrush compressor is perfect for any hobby or artist airbrush. The maximum operating pressure will be about 35 PSI depending on airbrush being used. The DH550R is lightweight, easily mobile and best of all quiet. The auto shutoff feature turns the compressor off when the airbrush is not being triggered to increase compressor life. Included with the compressor is a 1/8BPS adaptor for competitor hoses. The compressor features include: · 1/5 HP piston compressor · Regulator & moisture trap · Delivers 1-35 PSI depending on airbrush being used · Standard Paasche 1/4NPT hose fitting · 1/8 BPS hose adaptor for competitor hoses · Auto shutoff feature · Carrying handle · Quiet: noise level is 47 Db’s Paasche 1/5 HP Airbrush Compressor w/ VL Double Action Siphon Feed Airbrush Set VL Double Action – Internal Mix – Siphon Feed Airbrush: The VL series is our most popular Airbrush due to its durability and ability to spray most material whether thick or thin. The PTFE packing can handle water based or solvent based mediums. The VL airbrush offers versatility with three interchangeable head sizes. This model can achieve spray patterns from fine detail to broader coverage handling light, medium and heavy fluids. The rounded head allows for easy removal of any dried paint with just a pinch of your fingers. VL-SET Includes: VL airbrush with size 3 head, size 1 & 5 heads, 1 oz bottle assembly, 1/4oz metal cup, 1oz storage bottle, 6′ braided hose, hanger, wrench and lessons book. Features: • Airbrush Made In The USA • Three head sizes for any application • Highly polished & hardened stainless steel needles for long life and reduced clogging • Line adjustment screw that can be used to pre-adjust paint flow • Solvent proof PTFE needle packing allows spraying of water & solvent based paints • Removable needle protector for fine detail spraying • Chrome plated body Specs: Part Number: VL-SET Type: Double action, Internal mix, Siphon feed Head Size: Size 1 (.55mm), Size 3 (.74mm), Size 5 (1.05mm) Fluid Packing: PTFE – Can spray solvent or water-based fluids Air Volume: 20 PSI @ .5 CFM Air Pressure: 20-75 PSI Air Inlet: ¼”-20 Thread (Paasche thread) – adapters available Bottle size: 1/4oz to 8oz bottles available Spray Pattern: 1/32″ to 1-1/2″ Weight: 1.1 Lbs The DH550R airbrush compressor is perfect for any hobby or artist airbrush. The maximum operating pressure will be about 35 PSI depending on airbrush being used. The DH550R is lightweight, easily mobile and best of all quiet. The auto shutoff feature turns the compressor off when the airbrush is not being triggered to increase compressor life. Included with the compressor is a 1/8BPS adaptor for competitor hoses. The compressor features include: · 1/5 HP piston compressor · Regulator & moisture trap · Delivers 1-35 PSI depending on airbrush being used · Standard Paasche 1/4NPT hose fitting · 1/8 BPS hose adaptor for competitor hoses · Auto shutoff feature · Carrying handle · Quiet: noise level is 47 Db’s Returns If you are not 100% satisfied with your purchase, you can return the product and get a refund. You can return a product for up to 30 days from the date you purchased. ​​​​​​​Any product you return must be in the same condition you received it and in the original packaging. Customer pays return shipping.​​​​​​​​​​​​​​​​​​​​​ Payment We accept payment by any of the following methods: PayPal & Major Credit Cards Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! Shipping Your order will be dispatched within 1-2 working day of receiving payment (Monday-Friday) and you should expect to receive it one or five days after dispatch. Tracking number will be on the invoice which will be e-mailed. VL Double Action – Internal Mix – Siphon Feed Airbrush: The VL series is our most popular Airbrush due to its durability and ability to spray most material whether thick or thin. The PTFE packing can handle water based or solvent based mediums. The VL airbrush offers versatility with three interchangeable head sizes. This model can achieve spray patterns from fine detail to broader coverage handling light, medium and heavy fluids. The rounded head allows for easy removal of any dried paint with just a pinch of your fingers. VL-SET Includes: VL airbrush with size 3 head, size 1 & 5 heads, 1 oz bottle assembly, 1/4oz metal cup, 1oz storage bottle, 6′ braided hose, hanger, wrench and lessons book. Features: • Airbrush Made In The USA • Three head sizes for any application • Highly polished & hardened stainless steel needles for long life and reduced clogging • Line adjustment screw that can be used to pre-adjust paint flow • Solvent proof PTFE needle packing allows spraying of water & solvent based paints • Removable needle protector for fine detail spraying • Chrome plated body Specs: Part Number: VL-SET Type: Double action, Internal mix, Siphon feed Head Size: Size 1 (.55mm), Size 3 (.74mm), Size 5 (1.05mm) Fluid Packing: PTFE – Can spray solvent or water-based fluids Air Volume: 20 PSI @ .5 CFM Air Pressure: 20-75 PSI Air Inlet: ¼”-20 Thread (Paasche thread) – adapters available Bottle size: 1/4oz to 8oz bottles available Spray Pattern: 1/32″ to 1-1/2″ Weight: 1.1 Lbs The DH550R airbrush compressor is perfect for any hobby or artist airbrush. The maximum operating pressure will be about 35 PSI depending on airbrush being used. The DH550R is lightweight, easily mobile and best of all quiet. The auto shutoff feature turns the compressor off when the airbrush is not being triggered to increase compressor life. Included with the compressor is a 1/8BPS adaptor for competitor hoses. The compressor features include: · 1/5 HP piston compressor · Regulator & moisture trap · Delivers 1-35 PSI depending on airbrush being used · Standard Paasche 1/4NPT hose fitting · 1/8 BPS hose adaptor for competitor hoses · Auto shutoff feature · Carrying handle · Quiet: noise level is 47 Db’s

Paasche 1/5 HP Airbrush Compressor w/ H Single Action Airbrush

Paasche 1/5 HP Airbrush Compressor w/ H Single Action Airbrush H Single Action – External Mix – Siphon Feed Airbrush: This single action airbrush features a chrome plated body for durability. The H single action allows the user to achieve fine lines down to 1/16 inch and wider patterns of up to 1-1/2 inches. It simple and easy to use and requires very little practice compared to double action models. The best uses are those requiring more basic spraying like solid coats, uniform lines or stencil work. Clean up is as simple as spraying your paint cleaner though the airbrush. The H is used for many applications including hobby, craft, chip, and ding repair, taxidermy, ceramics, cake decorating, tanning, tattoos, etc. The H airbrush is made in the USA. Includes: H#3 airbrush, 1 oz bottle assembly, wrench, 6 foot braided air hose and manual Features: · Airbrush Made In The USA · The most popular head (.65mm) · Highly polished & hardened stainless steel needles for long life and reduced clogging · Solvent proof needle packing allow spraying of water & solvent based paints · Chrome plated body Specs: Part Number: H Airbrush Type: Single Action, External mix, Siphon feed Head Size: Size 3 (.65mm) Fluid Packing: Can spray solvent or water-based fluids Air Volume: 20 PSI @ .5 CFM Air Pressure: 20-75 PSI Air Inlet: ¼-20 Thread (Paasche thread) – adapters available Bottle size: 1/4oz to 8oz bottles available Spray Pattern: 1/32 to 1-1/2 Finish: Chrome plated body The DH550R airbrush compressor is perfect for any hobby or artist airbrush. The maximum operating pressure will be about 35 PSI depending on airbrush being used. The DH550R is lightweight, easily mobile and best of all quiet. The auto shutoff feature turns the compressor off when the airbrush is not being triggered to increase compressor life. Included with the compressor is a 1/8BPS adaptor for competitor hoses. The compressor features include: · 1/5 HP piston compressor · Regulator & moisture trap · Delivers 1-35 PSI depending on airbrush being used · Standard Paasche 1/4NPT hose fitting · 1/8 BPS hose adaptor for competitor hoses · Auto shutoff feature ​​​​​​​​​​​​​​​​​​​​​ Payment We accept payment by any of the following methods: PayPal & Major Credit Cards Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! Shipping Your order will be dispatched within 1-2 working day of receiving payment (Monday-Friday) and you should expect to receive it one or five days after dispatch. Tracking number will be on the invoice which will be e-mailed. Returns If you are not 100% satisfied with your purchase, you can return the product and get a refund. You can return a product for up to 30 days from the date you purchased. ​​​​​​​Any product you return must be in the same condition you received it and in the original packaging. Customer pays return shipping.H Single Action – External Mix – Siphon Feed Airbrush: This single action airbrush features a chrome plated body for durability. The H single action allows the user to achieve fine lines down to 1/16 inch and wider patterns of up to 1-1/2 inches. It simple and easy to use and requires very little practice compared to double action models. The best uses are those requiring more basic spraying like solid coats, uniform lines or stencil work. Clean up is as simple as spraying your paint cleaner though the airbrush. The H is used for many applications including hobby, craft, chip, and ding repair, taxidermy, ceramics, cake decorating, tanning, tattoos, etc. The H airbrush is made in the USA. Includes: H#3 airbrush, 1 oz bottle assembly, wrench, 6 foot braided air hose and manual Features: · Airbrush Made In The USA · The most popular head (.65mm) · Highly polished & hardened stainless steel needles for long life and reduced clogging · Solvent proof needle packing allow spraying of water & solvent based paints · Chrome plated body Specs: Part Number: H Airbrush Type: Single Action, External mix, Siphon feed Head Size: Size 3 (.65mm) Fluid Packing: Can spray solvent or water-based fluids Air Volume: 20 PSI @ .5 CFM Air Pressure: 20-75 PSI Air Inlet: ¼-20 Thread (Paasche thread) – adapters available Bottle size: 1/4oz to 8oz bottles available Spray Pattern: 1/32 to 1-1/2 Finish: Chrome plated body The DH550R airbrush compressor is perfect for any hobby or artist airbrush. The maximum operating pressure will be about 35 PSI depending on airbrush being used. The DH550R is lightweight, easily mobile and best of all quiet. The auto shutoff feature turns the compressor off when the airbrush is not being triggered to increase compressor life. Included with the compressor is a 1/8BPS adaptor for competitor hoses. The compressor features include: · 1/5 HP piston compressor · Regulator & moisture trap · Delivers 1-35 PSI depending on airbrush being used · Standard Paasche 1/4NPT hose fitting · 1/8 BPS hose adaptor for competitor hoses · Auto shutoff feature Paasche 1/5 HP Airbrush Compressor w/ H Single Action Airbrush H Single Action – External Mix – Siphon Feed Airbrush: This single action airbrush features a chrome plated body for durability. The H single action allows the user to achieve fine lines down to 1/16 inch and wider patterns of up to 1-1/2 inches. It simple and easy to use and requires very little practice compared to double action models. The best uses are those requiring more basic spraying like solid coats, uniform lines or stencil work. Clean up is as simple as spraying your paint cleaner though the airbrush. The H is used for many applications including hobby, craft, chip, and ding repair, taxidermy, ceramics, cake decorating, tanning, tattoos, etc. The H airbrush is made in the USA. Includes: H#3 airbrush, 1 oz bottle assembly, wrench, 6 foot braided air hose and manual Features: · Airbrush Made In The USA · The most popular head (.65mm) · Highly polished & hardened stainless steel needles for long life and reduced clogging · Solvent proof needle packing allow spraying of water & solvent based paints · Chrome plated body Specs: Part Number: H Airbrush Type: Single Action, External mix, Siphon feed Head Size: Size 3 (.65mm) Fluid Packing: Can spray solvent or water-based fluids Air Volume: 20 PSI @ .5 CFM Air Pressure: 20-75 PSI Air Inlet: ¼-20 Thread (Paasche thread) – adapters available Bottle size: 1/4oz to 8oz bottles available Spray Pattern: 1/32 to 1-1/2 Finish: Chrome plated body The DH550R airbrush compressor is perfect for any hobby or artist airbrush. The maximum operating pressure will be about 35 PSI depending on airbrush being used. The DH550R is lightweight, easily mobile and best of all quiet. The auto shutoff feature turns the compressor off when the airbrush is not being triggered to increase compressor life. Included with the compressor is a 1/8BPS adaptor for competitor hoses. The compressor features include: · 1/5 HP piston compressor · Regulator & moisture trap · Delivers 1-35 PSI depending on airbrush being used · Standard Paasche 1/4NPT hose fitting · 1/8 BPS hose adaptor for competitor hoses · Auto shutoff feature Returns If you are not 100% satisfied with your purchase, you can return the product and get a refund. You can return a product for up to 30 days from the date you purchased. ​​​​​​​Any product you return must be in the same condition you received it and in the original packaging. Customer pays return shipping.​​​​​​​​​​​​​​​​​​​​​ Payment We accept payment by any of the following methods: PayPal & Major Credit Cards Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner! Shipping Your order will be dispatched within 1-2 working day of receiving payment (Monday-Friday) and you should expect to receive it one or five days after dispatch. Tracking number will be on the invoice which will be e-mailed. H Single Action – External Mix – Siphon Feed Airbrush: This single action airbrush features a chrome plated body for durability. The H single action allows the user to achieve fine lines down to 1/16 inch and wider patterns of up to 1-1/2 inches. It simple and easy to use and requires very little practice compared to double action models. The best uses are those requiring more basic spraying like solid coats, uniform lines or stencil work. Clean up is as simple as spraying your paint cleaner though the airbrush. The H is used for many applications including hobby, craft, chip, and ding repair, taxidermy, ceramics, cake decorating, tanning, tattoos, etc. The H airbrush is made in the USA. Includes: H#3 airbrush, 1 oz bottle assembly, wrench, 6 foot braided air hose and manual Features: · Airbrush Made In The USA · The most popular head (.65mm) · Highly polished & hardened stainless steel needles for long life and reduced clogging · Solvent proof needle packing allow spraying of water & solvent based paints · Chrome plated body Specs: Part Number: H Airbrush Type: Single Action, External mix, Siphon feed Head Size: Size 3 (.65mm) Fluid Packing: Can spray solvent or water-based fluids Air Volume: 20 PSI @ .5 CFM Air Pressure: 20-75 PSI Air Inlet: ¼-20 Thread (Paasche thread) – adapters available Bottle size: 1/4oz to 8oz bottles available Spray Pattern: 1/32 to 1-1/2 Finish: Chrome plated body The DH550R airbrush compressor is perfect for any hobby or artist airbrush. The maximum operating pressure will be about 35 PSI depending on airbrush being used. The DH550R is lightweight, easily mobile and best of all quiet. The auto shutoff feature turns the compressor off when the airbrush is not being triggered to increase compressor life. Included with the compressor is a 1/8BPS adaptor for competitor hoses. The compressor features include: · 1/5 HP piston compressor · Regulator & moisture trap · Delivers 1-35 PSI depending on airbrush being used · Standard Paasche 1/4NPT hose fitting · 1/8 BPS hose adaptor for competitor hoses · Auto shutoff feature

Paasche Airbrush System w/H-1AS Airbrush, DA300R Compressor & Quick Connect

Paasche DA300R Airbrush Compressor w/ H Single Action Airbrush & Quick Disconnect H-1AS (formerly 2000H) Single Action – External Mix – Siphon Feed Airbrush: This single action airbrush features a chrome plated body for durability. Airbrush is assembled with size #3 head. Which allow the H airbrush to be used in a wide range of application. The H single action allows the user to achieve fine lines down to 1/16 inch and wider patterns of up to 1-1/2 inches. It simple and easy to use and requires very little practice compared to double action models. The best uses are those requiring more basic spraying like solid coats, uniform lines or stencil work. Clean up is as simple as spraying your paint cleaner though the airbrush. The H is used for many applications including hobby, craft, chip and ding repair, taxidermy, ceramics, cake decorating, tanning, tattoos, etc. The H airbrush is made in the USA. H-1AS Includes: H#3 airbrush, 1 oz bottle assembly, 1 oz storage bottle, hanger, wrench, 6 foot braided air hose, lessons booklet and manual Features: Airbrush Made In The USA Highly polished & hardened stainless steel needles for long life and reduced clogging Solvent proof needle packing allow spraying of water & solvent based paints Chrome plated body Specs: Part Number: H-1AS Type: Single Action, External mix, Siphon feed Head Size: Size 3 (.65mm) Fluid Packing: Can spray solvent or water based fluids Air Volume: 20 PSI @ .5 CFM Air Pressure: 20-75 PSI Air Inlet: ¼”-20 Thread (Paasche thread) – adapters available Bottle size: 1/4oz to 8oz bottles available Spray Pattern: 1/32″ to 1-1/2″ Weight: 1 Lbs Finish: Chrome plated body The DA300R airbrush compressor is perfect for any hobby or artist airbrush. The maximum operating pressure will be about 35 PSI depending on airbrush being used. The DA300R is light weight, easily mobile and best of all quiet. The auto shutoff feature turn the compressor off when the airbrush is not being triggered to increase compressor life. Included with the compressor is a 1/8BPS adaptor for competitor hoses. The compressor features include: · 1/5 HP piston compressor · Regulator & moisture trap · Delivers 1-35 PSI depending on airbrush being used · Standard Paassche 1/4NPT hose fitting · 1/8 BPS hose adaptor for competitor hoses · Auto shutoff feature · Carrying handle · Quiet: noise level is 47 Db’s The A-191 Quick connect is included and allows for fast and easy removal of airbrush from the air hose. ​​​​​​​​​​​​​​​​​​​​​ Payment We accept payment by any of the following methods: PayPal Orders will be processed for shipment once payment is received. Shipping Your order will be Shipped within 1-2 working day of receiving payment (Monday-Friday) and you should expect to receive it 1-5 work days after dispatch. Tracking number will be sent after shipment. Returns If you are not 100% satisfied with your purchase, you can return the product and get a refund. You can return a product for up to 30 days from the date you purchased. ​​​​​​​Any product you return must be in the same condition you received it and in the original packaging. Customer pays return shipping. E-mail for an RGA authorization.H-1AS Single Action – External Mix – Siphon Feed Airbrush: This single action airbrush features a chrome plated body for durability. Airbrush is assembled with size #3 head. Which allow the H airbrush to be used in a wide range of application. The H single action allows the user to achieve fine lines down to 1/16 inch and wider patterns of up to 1-1/2 inches. It simple and easy to use and requires very little practice compared to double action models. The best uses are those requiring more basic spraying like solid coats, uniform lines or stencil work. Clean up is as simple as spraying your paint cleaner though the airbrush. The H is used for many applications including hobby, craft, chip and ding repair, taxidermy, ceramics, cake decorating, tanning, tattoos, etc. The H airbrush is made in the USA. H-1AS Includes: H#3 airbrush, 1 oz bottle assembly, 1 oz storage bottle, hanger, wrench, 6 foot braided air hose, lessons booklet and manual Features: Airbrush Made In The USA Highly polished & hardened stainless steel needles for long life and reduced clogging Solvent proof needle packing allow spraying of water & solvent based paints Chrome plated body Specs: Part Number: H-1AS Type: Single Action, External mix, Siphon feed Head Size: Size 3 (.65mm) Fluid Packing: Can spray solvent or water based fluids Air Volume: 20 PSI @ .5 CFM Air Pressure: 20-75 PSI Air Inlet: ¼”-20 Thread (Paasche thread) – adapters available Bottle size: 1/4oz to 8oz bottles available Spray Pattern: 1/32″ to 1-1/2″ Weight: 1 Lbs Finish: Chrome plated body The DA300R airbrush compressor is perfect for any hobby or artist airbrush. The maximum operating pressure will be about 35 PSI depending on airbrush being used. The DA300R is light weight, easily mobile and best of all quiet. The auto shutoff feature turn the compressor off when the airbrush is not being triggered to increase compressor life. Included with the compressor is a 1/8BPS adaptor for competitor hoses. The compressor features include: · 1/5 HP piston compressor · Regulator & moisture trap · Delivers 1-35 PSI depending on airbrush being used · Standard Paassche 1/4NPT hose fitting · 1/8 BPS hose adaptor for competitor hoses · Auto shutoff feature · Carrying handle · Quiet: noise level is 47 Db’s The A-191 Quick connect is included and allows for fast and easy removal of airbrush from the air hose. Paasche DA300R Airbrush Compressor w/ H Single Action Airbrush & Quick Disconnect H-1AS Single Action – External Mix – Siphon Feed Airbrush: This single action airbrush features a chrome plated body for durability. Airbrush is assembled with size #3 head. Which allow the H airbrush to be used in a wide range of application. The H single action allows the user to achieve fine lines down to 1/16 inch and wider patterns of up to 1-1/2 inches. It simple and easy to use and requires very little practice compared to double action models. The best uses are those requiring more basic spraying like solid coats, uniform lines or stencil work. Clean up is as simple as spraying your paint cleaner though the airbrush. The H is used for many applications including hobby, craft, chip and ding repair, taxidermy, ceramics, cake decorating, tanning, tattoos, etc. The H airbrush is made in the USA. H-1AS Includes: H#3 airbrush, 1 oz bottle assembly, 1 oz storage bottle, hanger, wrench, 6 foot braided air hose, lessons booklet and manual Features: Airbrush Made In The USA Highly polished & hardened stainless steel needles for long life and reduced clogging Solvent proof needle packing allow spraying of water & solvent based paints Chrome plated body Specs: Part Number: H-1AS Type: Single Action, External mix, Siphon feed Head Size: Size 3 (.65mm) Fluid Packing: Can spray solvent or water based fluids Air Volume: 20 PSI @ .5 CFM Air Pressure: 20-75 PSI Air Inlet: ¼”-20 Thread (Paasche thread) – adapters available Bottle size: 1/4oz to 8oz bottles available Spray Pattern: 1/32″ to 1-1/2″ Weight: 1 Lbs Finish: Chrome plated body The DA300R airbrush compressor is perfect for any hobby or artist airbrush. The maximum operating pressure will be about 35 PSI depending on airbrush being used. The DA300R is light weight, easily mobile and best of all quiet. The auto shutoff feature turn the compressor off when the airbrush is not being triggered to increase compressor life. Included with the compressor is a 1/8BPS adaptor for competitor hoses. The compressor features include: · 1/5 HP piston compressor · Regulator & moisture trap · Delivers 1-35 PSI depending on airbrush being used · Standard Paassche 1/4NPT hose fitting · 1/8 BPS hose adaptor for competitor hoses · Auto shutoff feature · Carrying handle · Quiet: noise level is 47 Db’s The A-191 Quick connect is included and allows for fast and easy removal of airbrush from the air hose. Returns If you are not 100% satisfied with your purchase, you can return the product and get a refund. You can return a product for up to 30 days from the date you purchased. ​​​​​​​Any product you return must be in the same condition you received it and in the original packaging. Customer pays return shipping. E-mail for an RGA authoization.​​​​​​​​​​​​​​​​​​​​​ Payment We accept payment by any of the following methods: PayPal Orders will be processed for shipment once payment is received. Shipping Your order will be Shipped within 1-2 working day of receiving payment (Monday-Friday) and you should expect to receive it 1-5 work days after dispatch. Tracking number will be sent after shipment. H-1AS Single Action – External Mix – Siphon Feed Airbrush: This single action airbrush features a chrome plated body for durability. Airbrush is assembled with size #3 head. Which allow the H airbrush to be used in a wide range of application. The H single action allows the user to achieve fine lines down to 1/16 inch and wider patterns of up to 1-1/2 inches. It simple and easy to use and requires very little practice compared to double action models. The best uses are those requiring more basic spraying like solid coats, uniform lines or stencil work. Clean up is as simple as spraying your paint cleaner though the airbrush. The H is used for many applications including hobby, craft, chip and ding repair, taxidermy, ceramics, cake decorating, tanning, tattoos, etc. The H airbrush is made in the USA. 2H-1AS Includes: H#3 airbrush, 1 oz bottle assembly, 1 oz storage bottle, hanger, wrench, 6 foot braided air hose, lessons booklet and manual Features: Airbrush Made In The USA Highly polished & hardened stainless steel needles for long life and reduced clogging Solvent proof needle packing allow spraying of water & solvent based paints Chrome plated body Specs: Part Number: H-1AS Type: Single Action, External mix, Siphon feed Head Size: Size 3 (.65mm) Fluid Packing: Can spray solvent or water based fluids Air Volume: 20 PSI @ .5 CFM Air Pressure: 20-75 PSI Air Inlet: ¼”-20 Thread (Paasche thread) – adapters available Bottle size: 1/4oz to 8oz bottles available Spray Pattern: 1/32″ to 1-1/2″ Weight: 1 Lbs Finish: Chrome plated body The DA300R airbrush compressor is perfect for any hobby or artist airbrush. The maximum operating pressure will be about 35 PSI depending on airbrush being used. The DA300R is light weight, easily mobile and best of all quiet. The auto shutoff feature turn the compressor off when the airbrush is not being triggered to increase compressor life. Included with the compressor is a 1/8BPS adaptor for competitor hoses. The compressor features include: · 1/5 HP piston compressor · Regulator & moisture trap · Delivers 1-35 PSI depending on airbrush being used · Standard Paassche 1/4NPT hose fitting · 1/8 BPS hose adaptor for competitor hoses · Auto shutoff feature · Carrying handle · Quiet: noise level is 47 Db’s The A-191 Quick connect is included and allows for fast and easy removal of airbrush from the air hose.

Central Pneumatic Airbrush Compressor Regulator Airbrush & Adapter 115v /60 Hz

The Central Pneumatic Airbrush Compressor Regulator Airbrush is a piston-type model designed for airbrushing applications. The T-39 model operates at 115v and 60 Hz, providing consistent and reliable air pressure for precision painting. This system is ideal for artists and craftspeople looking to achieve smooth and controlled results in their work. this was used for some small artwork projects a couple years ago works great. Check out the Photos email any questions low price thanks for looking. N-S

D500 Paasche Oilless Piston Airbrush Compressor 1/8 hp w/Auto Shutoff

The D500 Paasche Oilless Piston Airbrush Compressor is a reliable and efficient tool for artists and crafters. With its 1/8 hp motor and auto shutoff feature, it provides consistent and controlled air pressure for precise painting and detailing. The piston design ensures smooth and even operation, making it a great addition to any airbrushing setup. Paasche Airbrush is a trusted brand known for producing high-quality airbrush equipment, making the D500 model a top choice for professionals and hobbyists alike.